Mic Archive
Electro-Voice RE510
Photo: Electro-Voice, from its spec sheet, p. 1.

Electro-Voice

Electro-Voice RE510

Supercardioid handheld condenser vocal mic with a low-frequency selector switch

Power Phantom 24-48 V.

Type
Condenser
Pattern
Supercardioid
Sensitivity
−49.9 dBV/Pa
vs 14 handheld condensers

More output than 31% of 14 handheld condensers.

Each stripe is one handheld condenser with a published sensitivity, and each bar counts them; further right means more output. This mic is in blue.

  • Among 204 condensers: more output than 9%
  • Among 311 mics: more output than 35%
Self-noise
22 dB(A)
vs 12 handheld condensers

Quieter than 27% of 12 handheld condensers.

Each stripe is one handheld condenser with a published self-noise, and each bar counts them; further right means quieter. This mic is in blue.

  • Among 258 condensers: quieter than 16%
  • Among 272 mics: quieter than 15%
Max SPL
146 dB SPL
vs 14 handheld condensers

Takes louder sound than 54% of 14 handheld condensers.

Each stripe is one handheld condenser with a published max SPL, and each bar counts them; further right means it takes louder sound. This mic is in blue.

  • Among 277 condensers: takes louder sound than 84%
  • Among 343 mics: takes louder sound than 82%
Rated range
40 – 20k Hz

Frequency response

Angle

Distance

From the spec sheet (Recording Hacks copy), p. 2.

Polar pattern

Transparency

From the spec sheet (Recording Hacks copy), p. 2.

All specs

From the spec sheet
Capsule5/8 in (16 mm) self-biased condenser capsule; high-current differential output stageFrom the feature list.p. 1
Sensitivity−49.9 dBV/Pa (3.2 mV/Pa)open circuit, 1 kHz. "3.2mV/Pascal"; converted (20 log10 0.0032 = -49.9).
Self-noise22 dB(A)"Self Noise: 22 dB SPL “A” weighted (0 dB=20 micropascals)".
Max SPL146 dB SPL1 kHz, 1% THD. "Maximum SPL, 1 kHz: 146 dB SPL (1% THD)".
Signal-to-noise ratio72 dBre 94 dB SPL. "Signal-to-Noise Ratio: 72 dB (@ 94 dB SPL)".
Dynamic range124 dBmaximum SPL to A-weighted noise. "Dynamic Range (Maximum SPL to A Weighted Noise Level): 124 dB".
Output impedance250 ohmoutput, 1 kHz. "Output Impedance, 1 kHz: 250 ohms".
Rated frequency range40 Hz to 20 kHz"Frequency Response: 40 Hz to 20,000 Hz"; no tolerance stated.
Poweringphantom 24-48 V"Power Requirements: Phantom Supply Requirement: 24 to 48 VDC".
Low cutflat, rolled off; low frequency selector switch, under the ball screen"Low-frequency roll-off switch enables tailoring of low-frequency response"; the switch photo (page 2) labels the positions "Low Frequencies Flat" and "Low Frequencies Rolled Off"; "securely located beneath the ball screen".
ConnectorXLR-3 maleNot stated by the manufacturer: No connector is named; the polarity note speaks of pins 2 and 3 ("Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3"), i.e. a 3-pin XLR.
Weight260 gnet. "Net Weight: 9.2 oz (260 grams)".p. 2
Dimensions182 × 51 × 25 mmLength × diameter × shank: "7.15 in (182 mm)", "2.0 in (51 mm)", "1.0 in (25 mm)".
Supplied accessories326 stand adapter (black); soft zippered gig bag"Accessories Included: 326 Stand Adapter (Black), Soft Zippered Gig Bag". Optional (page 3): 323S mic clamp; 376 (grey), 379-1 (black), 379-2 (red) windscreens.
Clipping level+2 dBV (1 kHz)p. 1
Low frequency selector switchRolled off: tailored to compensate for proximity effect; flat: "adds just enough warmth to be noticeable"
From the spec sheet (Recording Hacks copy)
Part number301259-000p. 2

Documents

Copies kept by Mic Archive (manufacturers move and drop their documents), unchanged, with their original addresses. Each is © its publisher.

Other mics

More from Electro-Voice

All 23 Electro-Voice mics

Other supercardioid condenser mics

All 419 mics